+49 9233 715 7745 info@md-innovationtech.com

ZEPHIR 2.5™ CAMERA

Based on a sensitive HgCdTe FPA, and integrating a four-stage TE cooler, ZephIR delivers an astounding 345 frame-per-second rate while reaching unrivalled low noise levels. Perfectly adapted for industrial applications in quality control and sorting as well as for scientific research.

 

CHARACTERISTICS

  • 345 frame-per-second
  • 4 stages TEC
  • Low noise level
  • HgCdTe (MCT) FPA
  • 0.85 to 2.5 µm
FOCAL PLAN ARRAY (FPA) HgCdTe
FPA SIZE 320 x 256 px
PIXEL SIZE 30 µm
SPECTRAL RANGE 0.85 – 2.5 µm
DARK CURRENT  4.8 pA or 30 Mē/px/s
(measured with a target at room temperature and sensor at -80°C)
High Gain  Low Gain
GAIN SETTING 10.30 ē/ADU   216 ē/ADU
READOUT NOISE 150 ē  980 ē
FULL WELL CAPACITY 160 Kē 3.3 Mē
READOUT MODES  ITR
DIGITIZATION 14 bits
FULL FRAME RATE Up to 340 fps
PEAK RESPONSIVITY 1.8A/W @ 2450 nm
QUANTUM EFFICIENCY Up to 85%
OPERABILITY (TYPICAL) > 98.5%
INTEGRATION TIME RANGE 1 µs to 100 ms (low gain)
COOLING TEC 4 stages, forced air
FPA OPERATING TEMPERATURE -80°C
COOLDOWN TIME 10 minutes
AMBIENT TEMPERATURE RANGE 10°C to 35°C
COLD SHIELD f#/1.4
SOFTWARE  PHySpec™ control and analysis software included
COMPUTER INTERFACE CameraLink™ or USB 3
EXTERNAL CONTROL On-demand
POWER SUPPLY REQUIREMENT 12 VDC @ 5 A
PHYSICAL DIMENSIONS 169 mm x 130 mm x 97.25 mm
WEIGHT 2.6 Kg
CERTIFICATION CE
NOTE: Photon etc. reserves the right to change the design and specification of the product at any time, without notice.

Applications

SAFETY & SECURITY

Photon etc’s infrared camera is an ideal tool for the rapid detection of explosive liquid precursors.

ENVIRONMENT & AGRICULTURE

Hyperspectral imagery can be efficiently used to identify any type of molecules through the analysis of its characteristic spectrum. Analysis of soils and chemical compositions – atmospheric pollution research – and more.